Enable / Disable HTTP and HTTPS on the Web RCS
The LivePremier supports HTTPS protocol. It is possible to enable / disable HTTP and HTTPS.
Note : Port⚓
Make sure port 443 is available on your network and/or not blocked by firewall to use HTTPS.
Tip :
If the Web RCS is not accessible, use the front panel to re-enable the HTTP Server, see Reset HTTP and HTTPS settings.
Go to Dashboard > Remote Access.
In HTTP Server, toggle the enable button for HTTP.
In HTTPS Server, toggle the enable button for HTTPS.
Click Apply.
If HTTP has been disabled, the current page will be disconnected from the Web RCS.
Use https:// before the device IP address to access the Web RCS in HTTPS (https://192.168.2.140 by default).