Device

Procedure
  1. In Identification, enter a name for the device.⚓
  2. In Back Panel, toggle the LED lights button to enable / disable the LEDs on the unit back panel.⚓
  3. In Front Panel,⚓
    • Toggle the Lock button to lock the front panel keys.
    • Set the Keys buttons Brightness.
    • Set LCD screen Brightness.
    • Set the LCD screen timeout before standby.

    WarningCaution⚓

    Disabling the LCD Standby may shorten the LCD backlight lifespan.

  4. In Date / Time,⚓

    • Set the device UTC Date and UTC Time. Click to use local computer date or time.

    • If needed, set the Time Zone.

    • If using Network Time Protocol (NTP), toggle the enable button.

    • Select Server IP Address and enter an IPv4 address or use DHCP, then apply

      OR select Server Name and enter a name, then Apply.

    NoteNTP protocol⚓

    The first connection can last a few minutes. If the connection fails, the settings are not applied.