Layer selection
The RC400T has two modes for selecting layers.
Layers | Shows all available live layers in the selected Screens as BKG Layer, Layer 1, Layer 2, etc. This mode allows quick selection of the same layer in multiple screens. It is recommended when programming shows with lots of Screens and Layers. |
|---|---|
Scr./Aux. Layers | Shows all available live layers in the selected Screens as S1.BKG, S1.L1, S1.L2, etc. This mode allows selecting a single layer when multiple Screens are selected. It is recommended when programming shows with less than 36 layers in total. |
Note :
It is only possible to select a layer when the corresponding Screen or Aux is selected, even when using Scr./Aux. Layers mode.
Example : Select one or multiple layer⚓
Some of the following procedures will require one or multiple layers to be selected.
On the Selection area, press the LCD key of a row. The row is on Mode selection.
Select the Screens & Aux. mode using the corresponding LED key. The row is in Screen mode.
Select the Screen using the corresponding LED key.
On another row, press the LCD key and select the Layers mode.
Select one or multiple layers. Use the rotary encoder to change the page if needed.
OR
On the Selection area, press the LCD key of a row. The row is on Mode selection.
Select the Scr./Aux. Layers mode using the corresponding LED key.
Select one or multiple layers. Use the rotary encoder to change the page if needed.