Use the Shot Box² and Control Box3 with LivePremier

Analog Way Shot Box² and Control Box3 can be used to recall Memories and trigger transitions.

Tip

With the software AW Shotbox Control, Shot Box² and Control Box3 can also be used when connected to a computer on the same network as the LivePremier™ device.

Note

  • In the Web RCS, in Dashboard > Remote Control, make sure the connection with External USB Controllers is enabled.

  • The Control Box3 (SB124T-3) has been designed specifically for the latest Analog Way product lines.

    The previous version, Control Box² (SB124T-2 designed for LiveCore products) is still compatible but some features are limited or not supported.

To use these controllers:⚓

  1. Connect the controller directly to the LivePremier unit via USB ports.

  2. On the unit front panel, go to Control > Controller.

    The reference of the controller is indicated.

    The tallies indicate the connection status ( = OK; = Connecting; = No Connection)

  3. Enable Identify to display ID on the controller (1 to 4).

  4. Select the controller to open its settings:

    Controller setting

    Description

    Enable

    Enable or disable the controller

    Backlight

    Set the keyboard brightness (in %)

    Mode*

    Choose to recall Screen Memories or Master Memories

    Screen*

    Choose the Screen

    Destination*

    Choose to interact with Program or Preview

    Autoscale

    Enable to rescale Memory to applied Screen canvas size

    Take on load

    Enable to automatically trigger the transition when loading a Memory on Preview

    Reset

    Reset the controller configuration

    * only available with the ShotBox²

  5. Use the keys of the controller to recall Memories and trigger transitions.