Creating a CremaTTe 3D LUT using a LivePremier live input

AW CremaTTe 3D is a free tool used to create a keying LUT using the inputs of a LivePremier device. It is available on www.analogway.com.

  1. Run AW CremaTTe 3D.

    a. In the Connection Wizard STEP 1, enter the IP address of the LivePremier device and click Connect.

    b. In STEP 2, select the input to key and a slot in the CremaTTe 3D LUT library.

    The input’s color space must be the same as the color space set for processing in system pre-configuration.

    c. Click Apply and go.

    When AW CremaTTe 3D is connected, the selected input is set to CremaTTe 3D Keying mode using the selected LUT slot.

    In the AW CremaTTe 3D main window, a capture of the selected input is displayed in the preview.

  2. If needed, Freeze the input in the Web RCS and click Capture Again in AW CremaTTe 3D.

  3. On the image preview, click a pixel in the area to key.

    The preview is updated with the CremaTTe 3D keying to show the background image.

    The CremaTTe 3D LUT is automatically saved in the selected LUT library slot

ExampleOption⚓

If needed, click Export.cube to export the LUT file or download it from the LUT library in the Web RCS.